Component terminal block; 4-conductor; LED (red); 24 VDC; for DIN-rail 35 x 15 and 35 x 7.5; 1.5 mm²; Push-in CAGE CLAMP®; 1,50 mm²; gray

Voltage type 1: DC; Tesiune nominala: 24; V Ratings per: IEC/EN 60947-7-1; Curent nominal: 0,025; A Tensiune nominala UL (Use Group B): 600; V Curent nominal UL (Use Group B): 15; A Tensiune nominala UL (Use Group C): 600; V Curent nominal UL (Use Group C): 15; A Certificari: UL 1059; Tehnologie conexiune: Push-in CAGE CLAMP®; Tip actionare: Push-in; Open Tool Slot; Connectable conductor materials: Copper; Nominal cross-section: 1.5 mm²; Solid conductor: 0.25 … 2.5 mm² / 22 … 14 AWG; Solid conductor; push-in termination: 0.75 … 2.5 mm² / 18 … 14 AWG; Fine-stranded conductor: 0.25 … 2.5 mm² / 22 … 14 AWG; Fine-stranded conductor; with insulated ferrule: 0.75 … 1.5 mm² / 18 … 16 AWG; Fine-stranded conductor; with ferrule; push-in termination: 0.75 … 1.5 mm² / 18 … 16 AWG; Strip length: 9 … 11 mm / 0.35 … 0.43 inch; Numar total de conexiuni: 4; Total number of potentials: 1; Numar nivele: 1; Wiring type: Front-entry wiring; Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross section can also be inserted via push-in termination.; Latime: 4.2 mm / 0.165 inch; Inaltime from upper-edge of DIN-rail: 32.9 mm / 1.295 inch; Adancime: 69.9 mm / 2.752 inch; Design: horizontal; Tip montaj: DIN-35 rail; Marking level: Center/side mark