Contactor PM12K-016150 400 V

Descriere

PM12 AC contactors for load currents from 10 to up 63 A (AC-3) are intended for actuating, shutting down and reversing of asynchronous electric motors equipped with a short-circuited rotor for the applied voltage limited to 660 V (AC-3 application category). They can be also used for remote control of lighting, heating circuits and various low-inductance loads (AC-1 application category). All unit types per load currents limited to up 40 A have a single group of auxiliary NO or NC contacts. Types per load currents exceeding 63 A have two contact groups (NO and NC). The PM12 contactor is a well-known brand in the market. PM12 IEK - compliance of mounting dimensions, PM12 series. The best performance among manufacturers PM12 performance - switching wear resistance is four times higher. Rated control supply voltage Us at AC 50HZ: 400 Rated control supply voltage Us at DC: - Rated operation current Ie, 400 V: 16 Connection type auxiliary circuit: EV000415 Number of auxiliary contacts as normally closed contact: 0 Number of auxiliary contacts as normally open contact: 1 Nominal operating AC voltage Ue: 230, 400, 660 Rated insulation voltage Ui: 660 Rated surge voltage: 6 Conventional Short Circuit Current Inc: 1000 Overcurrent Protection - Fuse gG: 20 Tightening moment: 1,2 Control voltage ranges at actuation Uc: 0,85…1,1 Flexible cable without tip: 1,5…4 Control voltage ranges at release Uc: 0,3…